Dust explosion protection in Europe

VMP D

Producer: RSBP

VMP safety rupture discs are a simple type of rupture disc for passive protection of equipment with combustible dust and air media: tanks, silos, separators, filters and other types. In case of accident-free operation, they cover special process ducts. During an explosion, the membranes rupture and release a shockwave and flame into the environment. As a result the protected equipment itself will not be damaged.

Explosion-proof rupture discs in accordance with EN 1127-1 are installed where the release of an explosion would not pose a risk to persons or property. In enclosed areas rupture discs are used together with flame arresters.

  • Description
  • Technical features
  • Documentation
  • Installation
Description

VMP D is a simple and economical type of rupture disc. They are made from a single layer of stainless steel, so they are suitable for equipment with operating temperatures up to 100 °C.

The convex shape allows membranes to be mounted in equipment of complex design. VMP D membranes are resistant to pressure pulses.

VMP bursting discs are certified according to TP TC 012/2011 and EN 14797

Advantages

  1. Suitable for operating conditions with temperatures up to 240 °C. Resistant to mechanical damage, vacuum and pressure pulses.
  2. Large selection of sizes allows a suitable rupture disc to be fitted to most types of process equipment.
  3. Easy to assemble – only two steps are required for assembly, using the pre-drawn drawing sets and assembly instructions.
  4. Easy to maintain – we will give you a detailed operating manual, describing the frequency of all operations. The customer’s employees are only required to visually inspect the cleanliness and integrity of the blast panel.
  5. Easy to replace after an accident. Can be installed without altering the structure of the existing process equipment.
  6. Only requires maintenance once a year, which reduces the cost of operation.
Technical features

Size, mmExplosion pressure release area (m2)A – External explosion panel size (mm)B – External explosion panel size (mm)
229 x 2290,05309309
260 x 2600,06340340
150 x 6000,08220670
220 x 5400,11300620
305 x 4570,12375527
610 x 2900,16685365
630 x 3100,18705385
490 x 5900,27565665
2x 610 x 2900,323851385
450 x 8000,34530880
2x 630 x 3100,353851385
586 x 9200,51661995
920 x 9200,81995995
915 x 11180,989901193
1020 x 1020110951095

*The pressure relief devices are provided depending on the area of the explosion pressure relief in order from the smallest to the largest.

** other VMP sizes on request.</>

VIDEO – HDR SYSTEM TEST – ACTIVE EXPLOSION SUPPRESSION MANUFACTURER: RSBP S.R.O.

Documentation

VMP D user manual
En
  • En
Installation

VMP D is supplied either with top frame, seal or separately. The safety rupture disk must be checked before installation:

  • Integrity of the original packaging;
  • The membrane itself and the seals are undamaged;
  • The connecting material is present, if it is included in the scope of delivery;
  • No damage to the indicator, if ordered.

The installation of rupture discs requires a design. It determines, among other things, the number of process openings on the equipment to be protected to release the explosion and the number of VMPs respectively, their type, the possibility of operation under existing conditions. The project is to be developed by a specialized company. For example, ATEX.CENTER.

The rupture discs are installed in accordance with the manufacturer’s instructions and the explosion protection project. The work consists of two basic steps. First, the mechanical installation is performed, followed by the installation and adjustment of the electrical part.

The installation of each membrane must be recorded in a special logbook or operating book with the date, initials and signature of the authorised person.

The scope of delivery includes:

  • Consignment note
  • EU Declaration of Conformity 2014/34/EU
  • Inspection certificate
  • Operating instructions

We will provide on request:

  • wiring diagram of the indicator;
  • technical description of the opening indicator;
  • technical description of the spark protection relay;
  • Panel wiring diagram;
  • Checklist;
  • The operating logbook.
Maintenance

The maintenance manual is included in the scope of delivery and is used as a basis for the operator’s documentation. In this manual, the maintenance intervals are determined.

Maintenance of the membrane consists of periodic inspection for cleanliness and damage, corrosion. Basic rules:

  • All operations must only be carried out with the equipment switched off;
  • Inspect the VMP for cleanliness and damage every shift;
  • Perform dusting and screw connection checks at least every six months or more frequently depending on the operating conditions;
  • Instruct employees on safety measures when working near the explosive membrane immediately after its installation (hiring a new employee) and at least once a year thereafter – the VMP is classified as an injury-prone equipment;
  • Do not enter the frame space and safety area when the equipment is in operation.

The safety rupture disc may only be serviced by the manufacturer, RSBP, or its authorised representative. The service interval is at least once a year.

Optionally

VMP can be equipped with:

  1. Door opening indicator. This is a diaphragm status indicator. If the VMP is opened the contact will be interrupted and the electrical circuit will be disconnected. The indicators can be magnetic or cable.
  2. Mounting kits for G1, G2 and G indicators. To be supplied on request.
  3. Intrinsic safety relay. Intrinsic safety relays are hazardous for life. The relay creates a boundary between the safe and hazardous area.
  4. Frames for VMP (type SU and D). Needed for mounting those membranes where there are no built-in frames. Made of stainless steel.
  5. Flanged seals. As standard they are made of EPDM material. As an option it can be replaced with silicone (FDA).
  6. Thermal insulation. Available on request.

Advantages of working with ATEX.CENTER

The customer will have no problems with the supply of components and service. ATEX.CENTER is an official distributor of the leading European distributor of explosion protection equipment RSBP spol. s r.o. Our specialists periodically confirm their qualification in his commission of expertise.
The customer will have no problems with the supply of components and service. ATEX.CENTER is an official distributor of the leading European distributor of explosion protection equipment RSBP spol. s r.o. Our specialists periodically confirm their qualification in his commission of expertise.
The customer will not have any problems with the supply of components and service maintenance. ATEX.CENTER.
The customer will not have any problems with the supply of components and service maintenance. ATEX.CENTER.
We open representative offices where our customers work. The customer saves time on service maintenance.
We open representative offices where our customers work. The customer saves time on service maintenance.
We cooperate with European experts in the field of ATEX. The customer receives professional experience in explosion protection.
We cooperate with European experts in the field of ATEX. The customer receives professional experience in explosion protection.
Consultation

Do you want to protect your production?

Sign up for a consultation with our experts and we'll give you all the information you need about how we can help.